500mA 12 Watts Class 2 Power Supply 5.12027

500mA 12 Watts Class 2 Power Supply 5.12027

500mA 12 Watts Class 2 Power Supply

• Constant Current Design
• Universal Ac Input / Full Range
• Fully Encapsulated With Ip67 Level
• Withstand 300vac Surge Input for 5 Seconds
• Protections: Short Circuit / Over Current / Over Voltage
• Fully Isolated Plastic Case
• Cooling By Free Air Convection
• Ul1310 Class 2 Power Unit
• Pass Lps
• 100% Full Load Burn-In Test
• Low Cost, High Reliability
• Suitable for Led Lighting And Moving Sign Applications

 

MODELItem Number 5.12027
OutputRATED CURRENT500 mA
DC VOLTAGE RANGE8~ 24V
RATED Power12W
RIPPLE &Amp; NOISE (max.) Note.2200m Vp-p
VOLTAGE TOLERANCE Note.3±5.0%
LINE REGULATION±1.0%
LOAD REGULATION±2.0%
SETUP, RISE TIME Note.6500ms, 120ms I 230VAC 500ms, 120ms I 115VAC at full load
HOLD UP TIME (Typ.)50ms/230VAC 16ms/115VAC at full load
INPUTVOLTAGE RANGE90~264VAC       127~ 370VDC
FREQUENCY RANGE47 - 63Hz
EFFICIENCY (Typ.)85%
AC CURRENT (Typ.)1.1A/115VAC    0.7A/230VAC
INRUSH CURRENT (Typ.)COLD START 30A/115VAC      60A/230VAC
LEAKAGE CURRENT0.25mA / 240VAC
PROTECTIONCURRENT LIMIT±5% Rated Output current
 Protection type: Constant current limiting type
OVER VOLTAGE50.4 ~  60V, 31.5  ~ 40.5V, 27.6   ~  32.4V
 Protection type: Shut off o/p voltage, clAmping by zener diode
ENVIRONMENTWORKING TEMP..-30~+75°C (Refer to Output load derating curve)
WORKING HUMIDITY20 - 90% RH non-condensing
STORAGE TEMP., HUMIDITY.-40 - +80°C, 10 - 95% RH
TEMP. COEFFICIENT±0.03%/°C (0 - 50°C)
VIBRATION10 - 500Hz, 2G 1Omin./1 cycle, period for 60min. each along X, Y, Zaxes
SAFETY &Amp; EMC (Note 6)SAFETY STANDARDSUL130 Class 2, CAN/CSA C22.2 No. 223-M91 (except for LPC-35-700).IP67 approed; design refer to TUV EN60950-1, EN61347-2-13
WITHSTAND VOLTAGEI/P-O/P:3KVAC 
ISOLATION RESISTANCEI/P-O/P:>100M Ohms/500VDC/ 25°C / 70% RH
EMI CONDUCTION &Amp;RADIATIONCompliance to EN55022 (CISPR22) CLASS B
HARMONIC CURRENTCompliance to EN61 000-3-2 Class A, EN61000-3-3
EMS IMMUNITYCompliance to EN61 000-4-2,3,4, 5, 6, 8,11, ENV50204, EN55024, light industrial level, criteria A
OTHERSMTBF743.5 Khrs min. MIL-HDBK-217F (25°C)
DIMENSION148*40*30mm (L*W*H)
PACKING0.34Kg; 40pcs/14.6Kg/O.63CUFT
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple &Amp; noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf &Amp; 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The Power Supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must re-quality EMC Directive on the complete installation again.
The Power Supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. Length of set up time is measured at cold first start. Turning ON/OFF the Power Supply  may lead to increase of the set up time.
7. In the European market this Power Supply can be used for LED lighting applications with input Power up to 25W.
8. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes.


 

Write a review

Please login or register to review
0 Product(s) Sold

Tags: 500ma 12 watts class 2 power supply 512025, 512026, transformers accessories, 500ma 12 watts class 2 power supply 5.12027 supplies